| Image |
Title |
Date |
 |
Clutch Nut Wrench <41mm x 34mm> 331-02
Used for removing and replacing the clutch nut on Yamaha and Suzuki.With 3/8＂driver and 19mm socket.
|
2024-04-10 |
 |
Shock Preload Adjusting Tool 14-K440
It helps you to adjust preload without damaging the shock spring collars.It fits 35mm to 75mm spring collars.
|
2024-04-10 |
 |
Shock Preload Adjusting Tools 14-K441
Tools help you to adjust preload without damaging the shock spring collars.The two tools can be used at the same time, one for holding, one for adjusting and that will allow you to adjust the collars
|
2024-04-10 |
 |
35mm Fork Cap Wrench 453-01
It is made from Polyamides (PA) with fiber and that will allow you to remove your fork cap without damaging it.
|
2024-04-10 |
 |
Fork Tube Tool and Cartridge Rod Holding Plate 14-K460
Fork Tube ToolUsed to assemble and disassemble fork tubes from fork bottoms.Cartridge Rod Holding PlatePerfect for disassembly and assembly of KYB/Showa Twin Chamber and most street cartridge forks.De
|
2024-04-10 |
 |
Seal Retainer and Fork Cap Tool 14-K486
Precision design allows users to easily remove and install of the rear wheel seal/bearing retainer ring with no damage to the retainer or to the hub.22mm hex and 3/8＂square drive.It is designed to fi
|
2024-04-10 |
 |
4-in-1 Fork Bleed Tool 14-K489
Tool provides 4 thread pitches of M10 x 1.0, M10 x 1.25, M12 x 1.0 and M12 x 1.25 which will work on almost any known street fork.
|
2024-04-10 |
 |
49mm Dual Chamber Fork Cap Wrench 14-K566A
A must have tool to remove the fork cap (cartridge) on dual chamber closed cartridge forks on Honda (except 2010 CRF250R) and Yamaha later motorcycles.The 12.5mm slot can hold the damper rod while rem
|
2024-04-10 |
Products type